What makes this machine different: the hairline satin finish is the one that
still looks clean at 5pm. Brushed stainless scatters light along the grain, so the handprints that
a mirror finish shows within an hour simply do not register. If the entrance is busy and nobody is
polishing it during the day, this is the finish to specify.
Wet Umbrella Bagger, Dual Chute
A bagger does one job and does it without supervision. The visitor lowers a wet umbrella into the
chute, draws it back out, and the umbrella comes away already sleeved. No power, no buttons, nothing
for a first-time user to work out. The whole interaction is over in about two seconds, which matters
when forty people arrive off the same tram.
Two chutes run side by side and work independently, so a compact umbrella and a full-length golf
umbrella can be bagged at the same moment by different people. That is the difference between a
steady flow through the door and a knot of dripping visitors waiting their turn.
Satin stainless in a wet environment
Stainless is specified here for the obvious reason: this machine spends its whole life in contact
with wet fabric and splashed water. The hairline grain runs the length of each panel, which also
makes light scuffing from umbrella tips far less visible than it would be on a coated surface. It
wipes down with a damp cloth.
Capacity that matches an Australian winter
Up to 2,000 bags sit inside at once. Across a wet fortnight in Melbourne or Sydney that is
typically enough to go untouched, which is the point. Reloading is a top-access job that takes under
a minute, and refill cartons ship from local stock.
Quiet to run, cheap to own
There is no motor, no heating element and no consumable beyond the bags themselves. Nothing draws
power, so there is no cabling to route to the door and no electrical inspection to schedule. The
only running cost is bags, and at carton pricing that lands well under ten cents per umbrella.
Where it earns its place
Any entrance with hard flooring and steady footfall. Water tracked ten metres into a building is
water that has to be mopped repeatedly, signed with a wet floor sign, and explained if somebody
slips. Stopping it at the threshold is the cheapest intervention available.
Ideal for
- Office towers and commercial lobbies
- Universities, TAFEs and school administration buildings
- Hospitals, clinics and aged care entrances
- Shopping centre and supermarket doors
- Council buildings, libraries and civic centres
Key features
- Dual chute for simultaneous use
- Hairline satin stainless steel, low-maintenance finish
- Takes long and folding umbrellas
- Up to 2,000 bags per load
- No power supply required
- Free-standing, no fixing needed
- Comes with 1,000 large and 1,000 small biodegradable bags
Comparing finishes? Every model in the entrance machine range shares this
same dual chute body, so the decision is about appearance and budget rather than performance.
Specifications
| Dimensions (W x D x H) |
450 x 390 x 785 mm |
| Material |
Hairline satin stainless steel |
| Chutes |
Dual chute, long and short umbrellas |
| Bag capacity |
Up to 2,000 bags per load |
| Bags included |
1,000 large + 1,000 small biodegradable umbrella bags |
| Weight (empty) |
15.4 kg |
| Weight (fully loaded) |
20.8 kg |
| Power required |
None, manual operation |
| SKU |
OP2-H |